May 22, 2012, 04:25:13 PM

DeWALT Owners Group « DEWALT POWER TOOL DISCUSSIONS « DEWALT FAQ's « New drill
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: New drill  (Read 1628 times)
0 Members and 2 Guests are viewing this topic.
MajorMagnuM
Newbie
Karma: +0/-0
Posts: 2
Offline Offline
« on: September 27, 2009, 01:02:13 PM »
Hello everyone!
I have been looking around for a Dewalt 36volt drill to match a nano pack that I have. I'm having trouble finding out the difference between the DC900 and the DC901. I was going to buy an 18v SC925L2-GB but having a 36v pack seems a good excuse to go for a really powerful multipurpose drill. Any comments would be much appreciated
Logged
DEWALTDUDE
D.O.G-
Administrator
BLEEDS YELLOW!
*****
Karma: +21/-0
Posts: 1136
Offline Offline
WWW
« Reply #1 on: September 28, 2009, 03:31:18 PM »
I agree, If you already have the battery then you might as well get the bare tool. You can buy a 36v bare drill on ebay for about the same price as a 28 or 18v bare drill. Also 36v batteries are very expensive, so if you have them I'd keep them.

The DC900 is the previous version. The DC901 has a dual clutch ring, updated Rohm chuck, more rubber, and 2.5 ounces lighter. If I were you I would go with the DC901, especially if you plan on using your clutch a lot.
Logged
Tell a man there are 300 billion stars in the universe and he'll believe you. Tell him a bench has wet paint on it and he'll have to touch to be sure.
MajorMagnuM
Newbie
Karma: +0/-0
Posts: 2
Offline Offline
« Reply #2 on: September 29, 2009, 11:03:42 AM »
Thanks very much for taking the time to reply to my post!
I went ahead and bought a DC900 (the ad said it was brand new not refurbished) off e bay for 75 pounds. It comes with the black carry case so I'm happy with the price. I should be able to get a charger for around 50 or less if I'm lucky.
Quite excited really as have Been using a bosch 12v nicad for an eternity and plugging in for the tuff stuff! Will let you know if it turns up  Smiley 
MajorMagnuM
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.16 | SMF © 2011, Simple Machines
Cargo design by DzinerStudio | Edited by cartpauj Professional Web Design
Unique Hits: 1838351