May 22, 2012, 04:39:51 PM

DeWALT Owners Group « GENERAL DISCUSSIONS « POWER TOOLS HOW TO'S « DC411 - Rotating the gear case
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: DC411 - Rotating the gear case  (Read 1633 times)
0 Members and 1 Guest are viewing this topic.
hiros
Newbie
Karma: +0/-0
Posts: 1
Offline Offline
« on: November 02, 2009, 02:34:49 AM »
hi fellow dewalt owners!

Got in a bit of situation and seeking the help if any DC411 owners have done it. I intend to do some errands cutting some steel and wanted to rotate the gear case of the DC411, but after removing the four corner screws, it does seems to be able to rotate. Are there any other procedure that need to be followed??

Thanks in advance for any assistance.
Logged
DEWALTDUDE
D.O.G-
Administrator
BLEEDS YELLOW!
*****
Karma: +21/-0
Posts: 1136
Offline Offline
WWW
« Reply #1 on: November 03, 2009, 08:36:42 PM »
I've never done it, I've also never heard of anyone doing it either. I will play around with it and see what your up against.
Logged
Tell a man there are 300 billion stars in the universe and he'll believe you. Tell him a bench has wet paint on it and he'll have to touch to be sure.
tooldevil
Newbie
Karma: +0/-0
Posts: 4
Offline Offline
« Reply #2 on: December 02, 2009, 06:59:28 AM »
Quote from: JC on November 03, 2009, 08:36:42 PM
I've never done it, I've also never heard of anyone doing it either. I will play around with it and see what your up against.

Hi Guys,

my name is Reiner, I am based in Germany, I am also using a DC 411, to rotate the gearbox you have to unscrew the gearbox with the 4 gearbox screws, than lift the gearbox incl. the beafle fan, part no. 9 in the service drawing, here is the retainer, part no. 10 in the service drawing located just a little than you can rotate the gearbox in steps of 90°. I hope this information helps.
Hopefully I have not to many spelling mistakes

Greatings from good old Germany
Reiner
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Powered by SMF 1.1.16 | SMF © 2011, Simple Machines
Cargo design by DzinerStudio | Edited by cartpauj Professional Web Design
Unique Hits: 1838380